REDARC REDWorks Power Panels: Dual Battery Systems Simplified

As we work remotely and take along more modern conveniences into the backcountry, power needs climb. More on-board power in your overland vehicle means a dual-battery setup. DIY solutions can be complicated to put together and hard to install. REDARC has simplified the whole process with its latest REDWorks Power Panels.

Simplified, Professional Power Management

The new REDARC REDWorks Power Panels are all-in-one systems sized to match a wide range of overland rigs. The product line simplifies off-grid vehicle power by removing the guesswork of figuring out the right combination of required components.

These pre-wired panels combine charging, monitoring, and distribution components into one compact system. Installation should be much easier than if you had to install everything separately. The panels remove concerns about compatibility and troubleshooting.

REDARC REDWorks Power Panels

There are five REDWorks Power Panel options to choose from. They range from designs for your basic weekend rig all the way up to large expedition vehicles for long-term, round-the-world travel.

REDWorks Nomad 50 | Photo by REDARC

REDWorks Scout 25 | Photo by REDARC

REDWorks Pioneer 50 | Photo by REDARC

• The Scout 25 is what you want for basic weekend trip setups. It combines a BCDC Core25 charger and Smart Battery Monitor with up to 25 amps of charging from vehicle and solar inputs.
• If your rig has higher power demands, the Nomad 50 is the system for extended trips off-grid. It provides 50-amp vehicle and solar charging, along with battery monitoring and start-battery recovery.
• The Pioneer 50 also offers 50-amp charging, and it also includes monitoring and control through the TVMS Rogue and RedVision Pro Display. This allows for management of lights, fridges, and anything else that’s connected to the system with either the display or the RedVision App.
• For larger expedition-style rigs, the QuickFit75 and QuickFit100 offer, you guessed it, 75 and 100-amp charging capacity.

Power For Your Overland Accessories

All the REDWorks panels feature the fit, finish, and durable construction that’s consistent across the REDARC product line. With powder-coated surfaces and automotive-gauge wiring, the power panels are designed to endure countless miles on the trail.

We look forward to seeing these featured on more rigs at Overland Expos and out on the road less traveled.